Everbuild Exact Gap Foam Hand Held 750ml
Exact GapEverbuild Exact Gap Foam has been formulated to provide a more precise foam product that only expands minimally from the bead extruded on application. The controlled application significantly reduces the amount of cured excess foam that has to be cut back afterwards, the waste disposal of which can be difficult on some sites.
UK Wide Delivery | SIIS Ltd
Dundee - 0 Available
Dunfermline - 0 Available
Edinburgh - 25 Available
Everbuild Exact Gap Foam Hand Held 750ml Features:
UK Wide Delivery | SIIS Ltd
Exact Gap Foam has been formulated to provide a more precise foam product that only expands by between 5-10% from the bead extruded on application. The controlled application significantly reduces the amount of cured excess foam that has to be cut back afterward, the waste disposal of which can be difficult on some sites, and reduces the danger of wet foam falling onto the floor and surrounding substrates, and the damage and staining this can cause. It is also the ideal product to use where it is important not to impact too much stress onto the item being installed. Gloves are included in the cap.
Everbuild Exact Gap Foam Hand Held 750ml Specifications:
Packaging 750ml aerosol
Shelf Life 24 months in original containers at stated storage temperatures.
Storage Conditions Store upright between 20 and 25°C. Protect from sunlight and do not expose to temperatures above 50°C. Do not pierce or burn the can even after use. Store as flammable liquid.
Note: Elevated temperatures will reduce shelf life dramatically.
Compressive Strength 3N/cm2 (DIN 53421) at 10% stress.
Tensile Strength 7-10N/cm2 (DIN 53530)
Shear Strength 4.5N/cm2 (DIN 53427)
Ambient Air Temperature 5°C - 30°C. (Optimum 20°C)
Cutting Time Cuttable in 9-12 mins (based on 20mm bead)
Tack Free Time 4-8 minutes
